ALUMINIUM WINDOWS & DOORS ELEGANT FOR SPECIAL REQUIREMENTS
PONZIO aluminum systems allow fabricating many different types of windows and doors, depending on the scope and specific requirements for aesthetics, functionality, thermal insulation, burglary resistance, smoke control or even fire resistance. These include both structures with no thermal insulation designed to fabricate internal partition walls and door, and solutions based on thermally insulated profiles. A significant part of thermally insulated systems is available in “HI” variant, and is characterized by special inserts into the profiles that lower the thermal conductivity coefficient.
All our systems from Ponzio offer hold technical approvals, certificates and test results:
ITB (Poland), ISTEDIL (Italy), IFT Rosenheim (Germany), IMP (Poland), PZH (Poland), Qualicoat (Switzerland), Passivhaus Instytute (Germany)
ALUMINUM WINDOWS & DOORS
PE40 WINDOWS & DOORS
Aluminum system profiles without the thermal insulation, mainly dedicated to the interior of buildings: boxes, partition walls, display cases, sliding doors (manually or automatically operated), double and single acting doors. The structural depth equals 40 mm. The PE 40 system allows using the variety of fillings: glass, aluminum panels, “sandwich” fillings, panel boards and PVC. The regular doors can be assembled in the PE 40 system. The advantage of axial clamped hinges is an ease of assembly in three planes.
ALUMINUM WINDOWS & DOORS
PT50/PE50 WINDOWS & DOORS
Aluminum system profiles without the thermal insulation, dedicated to the interior and exterior of buildings: boxes, partition walls, display cases, sliding doors (manually or automatically operated), double acting and smoke proof doors.
The PT50 system allows using the variety of fillings: glass, aluminum panels, „sandwich” fillings, panel boards and PVC of width 1 – 40 mm. The structural depth for frame and sash is 52 – 60 mm.
The regular doors or the coplanar doors can be assembled in the PT50 system. The advantage of axial clamped hinges is an ease of assembly in three planes.
[DOWNLOAD PDF BROCHURE]
ALUMINUM WINDOWS & DOORS
PT52 DOORS
The system with thermal insulation is assigned for accomplishment of outside building elements like: wind stoppers, shop windows, sliding front doors rated to the RMG 2.1 material group.
There are plenty of solutions for the window and door construction. The application of thermal insulator ensures correct drainage. The width of frames and sashes is 52 – 60 mm.
[DOWNLOAD PDF BROCHURE]
ALUMINUM WINDOWS & DOORS
PE52 WINDOWS
The three-chamber system, design with a profile groove in Euro standard and the groove used in windows and balcony doors made of PVC.
The structural depth of the frame is 52 mm and 60 mm for the wings. The system allows using a wide range of hardware and ease to work. Three-chamber profile provides the element with higher stiffness, thus the construction may be of larger size. Thanks to the modernization of sealing elements, there is no need for a drip, what positively influences the elevation beauty.
[DOWNLOAD PDF BROCHURE]
ALUMINUM WINDOWS & DOORS
PE60 WINDOWS
The three-chamber system for profiles with Euro standard hardware groove and cabinet used in windows and balcony doors made of PVC or wood profiles.
The structural depth of the profiles for frame is 60 mm, for sashes 68 mm. Wider-24 mm, in comparison with PE52 system, thermal insulator and two components central gasket guarantee high thermal parameters, being economic at the same time.
Thanks to the modernization of the sealing elements, there is no need for a drip, what positively influences the beauty of the curtain wall.
The system allows to use the wide range of hardware and eases their installation. Three-chamber PE60 system provides large stiffness of the profiles, which allows accomplishing construction of large dimensions.
[DOWNLOAD PDF BROCHURE]
ALUMINUM WINDOWS & DOORS
PE68 WINDOWS
The three-chamber system for the windows with "euro" standard hardware groove and groove used in windows and balcony doors made of PVC or wood profiles. The depth of the frame is 68 mm and the depth of leaf is 76 mm. Due to wider, in comparison to the PE 60, 32 mm thermal insulator and one or two component central gasket, we can achieve high high thermal parameters.
There is no need for a drip, what positively influences the beauty of the curtain wall, thanks to the modernization of the sealing elements.
The system allows to use the wide range of hardware and ease their installation. Three-chamber system PE68 permits to set up constructions of large dimensions.
Glass thickness of 18-59 mm can be applied into the system as well as the arched constructions.
[DOWNLOAD PDF BROCHURE]
ALUMINUM WINDOWS & DOORS
PE68 DOORS
The three-chamber insulated system for doors. The system has a coplanar structure profiles (notch clearance 18 mm) and the possibility of using glazing beads for “euro” standard groove.
In PE system specially profiled thermal breaks in the width of 24 mm are applied. What is more, specially designed, compatible profiles enable the connection between the door and windows. The structural depth of the frames and sashes is 68 mm.
There is a possibility to apply double and triple glazed units at the width of 51 mm. The frame heat transfer coefficient equals
1,5–2,1 W/m2K.
Wide range of hardware and doors locks can be used. PE68 allows to make kneaded, as well as screwed corner connections.
[DOWNLOAD PDF BROCHURE]
ALUMINUM WINDOWS & DOORS
PE78N WINDOWS
Three-chamber system with “euro” standard groove and groove used in windows and balcony doors made of PVC or wooden profiles.
It is dedicated for constructions with very high thermal requirements.
The structural depth of profiles for frames is 78mm, for sashes 86mm.
Thanks to multi chamber thermal breaks (42 mm) and two component central gasket we can obtain high thermal insulation. In PE78N Uf frame heat transfer coefficient equals 1,7 W/m2K. In more insulated version PE78N+, with closed glass chamber, the Uf value equals 1,3 W/m2K.
The system allows to use wide range of hardware and ease the mounting.
Three-chamber profile construction of PE78N system, provides large stiffness of profile, which allows accomplishing constructions of large dimensions.
[DOWNLOAD PDF BROCHURE]
ALUMINUM WINDOWS & DOORS
PE78N DOORS
The three chamber system for doors with thermal insulation. The system has a coplanar structure profiles (notch clearance 18 mm) and possibility of applying glazing beads for the “euro” standard groove. Profiled thermal breaks of width of 34 mm are applied in PE78N. Specially designed compatible profiles enable the ease of connection between door and windows. The structural depth for frames and sashes equals 78mm.
The system allows using a wide range of hardware and door locks. PE78N allows to make kneaded, as well as screwed corners connection. What is more, there can be applied the variety of threshold solutions (also PVC one) to guarantee the best water and thermal insulation.
[DOWNLOAD PDF BROCHURE]
ALUMINUM WINDOWS & DOORS
PE 78EI FIRE PROOF WINDOWS & DOORS
The three-chamber system is designed to set up internal or external firewalls. PE78EI allows to assembly single and double-wing, outward opening or inward opening doors with different threshold solutions. The system uses thermal pads which ensure resistance to fire : EI15, EI30, EI45, EI60, EI90, EI120. The structural depth of the frame and sashes is 78 mm (for frame EI120 - 89 mm).
In the system there is used thermal break - 35 mm wide, which ensures high thermal insulation.
There is an easy assembly of accessories in the PE78EI system, which greatly accelerates the formation of the structure. With the three chamber design and additional reinforcing elements, the system allows to assembly construction of large size.
[DOWNLOAD PDF BROCHURE]
ALUMINUM DESIGN PANEL DOORS
PE78NHI
The solution for very demanding customers applied in the PE68 and PE78N systems – intended to accomplish specially constructed doors, thanks to which we can obtain uniform plane of door.
The leaf profile was designed in such way that after sticking the filling into, there is a possibility of facing leaf with frame.
Light and stiff construction of the doors and various models of the offered panels, gives that solution an individual character and influences especially the architecture of private housing.
Ponzio PE78NHI - floating panel doors
Check here more information about aluminum front entry panel doors.
[DOWNLOAD PDF BROCHURE]
ALUMINUM WINDOWS
PE78N SLIM
- the narrow PE78N slim profiles were designed with modern spaces with large glazing
- 90 mm wide floating mullion
- 46 mm frame width, window sash width 56 mm
- very good performances confirmed by tests performed by IFT Rosenheim:
* air pemeability - class 4
* wind load resistance - class C5/B5
* watertightness - class E1500
ALUMINUM DOORS
PE78N DOORS WITH CENTRAL GASKET
Variant of the Ponzio PE78N system enriched with additional central gaskets, thanks to which it achieves even better thermal insulation parameters Uf.
Characteristic
- gasket attached to a special spacer (also available in bimetallic version)
- use of special corner plugs (seal the connection and facilitate installation) to connect the seals in the corners
- a new external house gasket with a large working range, thanks to which it eliminates construction and assembly errors
- glazing beads for Euro groove
- possibility of making large-size constructions
- profiled thermal separators
- door leaves flush with the frame
- specially designed compatible profiles enabling connection of the door with the website
- many ways of corner connections